https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in
accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forcibly actuated, Input
voltage: 24 V AC/DC
Product Description
The force-guided coupling relay module is approved for industrial control equipment in accordance with UL 508 (cULus listed). The requirements for
type A in accordance with DIN EN 61810-3 are satisfied if the circuit is designed as 1 N/O contact / 1 N/C contact.
Key Commercial Data
Packing unit
10 pc
GTIN
GTIN
4055626486062
Weight per Piece (excluding packing)
64.000 g
Custom tariff number
85364190
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
14 mm
Height
80 mm
Depth
104 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Maximum altitude
≤ 2000 m
Degree of protection
RT II (Relay)
12/30/2019 Page 1 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Technical data
Ambient conditions
IP20 (Relay base)
≥ IP54 (Installation location)
Coil side
Nominal input voltage UN
24 V AC/DC
Input voltage range in reference to UN
see diagram
Typical input current at UN
30 mA
Typical response time
3 ms ... 15 ms
Typical release time range
3 ms ... 15 ms
Coil voltage
24 V DC
Protective circuit
Bridge rectifier
Operating voltage display
Yellow LED
Contact side
Contact type
2 changeover contacts, forcibly actuated
Type of switch contact
Single contact
Contact material
AgNi
Force-guided contacts in accordance with EN 50205
Type B
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
5 V (10 mA)
Min. switching current
10 mA (5 V)
Maximum inrush current
6A
Limiting continuous current
6A
Interrupting rating (ohmic load) max.
144 W (24 V DC)
288 W (48 V DC)
88 W (110 V DC)
110 W (220 V DC)
1500 VA (250 V AC)
Switching capacity min.
150 mW
Switching capacity
3 A (24 V, DC13)
3 A (230 V, AC15)
General
Test voltage relay winding/relay contact
4 kVrms (50 Hz, 1 min.)
Test voltage PDT/PDT
2.5 kVrms (50 Hz, 1 min.)
Operating mode
100% operating factor
Mechanical service life
approx. 10 cycles
Mounting position
any
Assembly instructions
In rows with zero spacing
B10d
600000 Cycles (AC1; 250 V / 6 A; 1 NO)
7
900000 Cycles (AC1; 250 V / 3 A; 1 NO)
1800000 Cycles (AC1; 250 V / 1,5 A; 1 NO)
12/30/2019 Page 2 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Technical data
General
180000 Cycles (AC15; 250 V / 3 A; 1 NO)
560000 Cycles (AC15; 250 V / 2 A; 1 NO)
4600000 Cycles (AC15; 250 V / 0,75 A; 1 NO)
360000 Cycles (DC13; 24 V / 3 A; 1 NO)
740000 Cycles (DC13; 24 V / 1,5 A; 1 NO)
4200000 Cycles (DC13; 24 V / 0,75 A; 1 NO)
Connection data
Connection name
Coil side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Connection data 2
Connection name
Contact side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Standards and Regulations
Designation
Standards/regulations
Standards/regulations
EN 50178
DIN EN 61810-3
Rated insulation voltage
250 V AC
Rated surge voltage
6 kV
Insulation
Safe isolation, reinforced insulation
Pollution degree
2
Overvoltage category
III
UL, USA
UL 508
UL 508 Recognized
UL, USA/Canada
cUL 508
cUL 508 Recognized
Conformance/approvals
Designation
UL, USA
12/30/2019 Page 3 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Technical data
Conformance/approvals
Identification
UL 508
UL 508 Recognized
Designation
UL, USA/Canada
Identification
UL 508
UL 508 Recognized
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Diagram
Curve A: maximum continuous voltage at limiting continuous current
Curve B: minimum pick-up voltage for pre-excitation with UN and limiting continuous current
12/30/2019 Page 4 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Circuit diagram
Articles in set
Safety relays - REL-SR- 24DC/2X21/FG - 2908777
Safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact type: 2 changeover contacts.
The requirements for type A in accordance with DIN EN 61810-3 are satisfied if the circuit is designed as 1 N/O
contact / 1 N/C contact.
Classifications
eCl@ss
eCl@ss 5.0
27371600
eCl@ss 5.1
27371600
eCl@ss 6.0
27371600
eCl@ss 7.0
27371601
eCl@ss 8.0
27371601
eCl@ss 9.0
27371601
ETIM
ETIM 2.0
EC001437
ETIM 3.0
EC001437
ETIM 4.0
EC001437
12/30/2019 Page 5 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Classifications
ETIM
ETIM 5.0
EC001437
ETIM 6.0
EC001437
ETIM 7.0
EC001437
UNSPSC
UNSPSC 13.2
39122334
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
UNSPSC 20.0
39122334
UNSPSC 21.0
39122334
Approvals
Approvals
Approvals
UL Listed / cUL Listed / DNV GL / EAC / EAC / cULus Listed
Ex Approvals
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 172140
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 172140
DNV GL
https://approvalfinder.dnvgl.com/
TAE0000196-02
EAC
TR_TS_D_00573_c
12/30/2019 Page 6 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Approvals
EAC
TR_TS_S_00010_c
cULus Listed
Accessories
Accessories
Bridge
Continuous plug-in bridge - FBST 500-PLC RD - 2966786
Continuous plug-in bridge, length: 500 mm, color: red
Continuous plug-in bridge - FBST 500-PLC BU - 2966692
Continuous plug-in bridge, length: 500 mm, color: blue
Continuous plug-in bridge - FBST 500-PLC GY - 2966838
Continuous plug-in bridge, length: 500 mm, color: gray
Single plug-in bridge - FBST 6-PLC RD - 2966236
Single plug-in bridge, length: 6 mm, number of positions: 2, color: red
12/30/2019 Page 7 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Accessories
Single plug-in bridge - FBST 6-PLC BU - 2966812
Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue
Single plug-in bridge - FBST 6-PLC GY - 2966825
Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray
Single plug-in bridge - FBST 8-PLC GY - 2967688
Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray
Single plug-in bridge - FBST 14-PLC BK - 2967691
Single plug-in bridge, length: 14 mm, number of positions: 2, color: black
DIN rail
DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Stainless steel
V2A, uncoated, length: 2000 mm, color: silver
12/30/2019 Page 8 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
12/30/2019 Page 9 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
Labeled terminal marker
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width:
10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
Partition plate
Separating plate - PLC-ATP BK - 2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
Power module
12/30/2019 Page 10 / 12
https://www.phoenixcontact.com/gb/products/2910539
Relay Module - PLC-RPT- 24UC/2X21/FG - 2910539
Accessories
Power terminal block - PLC-ESK GY - 2966508
Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of
individual labels: 1000
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of
individual labels: 10
Spare parts
Safety relays - REL-SR- 24DC/2X21/FG - 2908777
Safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact type: 2 changeover contacts.
The requirements for type A in accordance with DIN EN 61810-3 are satisfied if the circuit is designed as 1 N/O
contact / 1 N/C contact.
12/30/2019 Page 11 / 12
https://www.phoenixcontact.com/gb/products/2910539
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
12/30/2019 Page 12 / 12
